Javascript has been disabled in your browser.
Please enable Javascript and visit again.






-Defibrillator / AED Tester


The AED NB-IoT Module WAIOT-N includes the main unit and the IoT bridge, which can be installed in the AED cabinet, allowing users to remotely monitor the AEDs with NB-IoT technology. The main unit automatically identifies the different audio frequencies of AED's daily self-test results; when used with the IoT bridge, it can detect the opening and closing of the AED cabinet, whether the AED is in the cabinet, etc., and upload all the aforementioned status to a user-owned management system or WhaleTeq AED Intelligent Management System (AIMS) in real time. The WAIOT-N assists AED managers in keeping abreast of each AED equipment at any time and saves the time for personnel to on-site confirm the self-test status one by one. It’s ideal for application on a massive amount of widely distributed AEDs with effortless management.

Ordering information

WAIOT-N main unit

  • Uses NB-IoT technology with the advantages of IoT monitoring such as low power consumption, wide coverage, and high security
  • Equipped with a sound receiving module - detects the AED self-test sounds and uploads the identification results to the user-owned management system or WhaleTeq AED Intelligent Management System (AIMS)
  • Identifies the AED status represented by different self-test audio frequencies such as normal, abnormal, and low battery
  • Power failure notification - when a sudden power failure results in insufficient power supply, a message will be sent to notify the user of the power failure at the AED installation site


With the IoT bridge

  • Detects the opening and closing of the AED cabinet and whether the AED is in the cabinet, etc., and uploads the status to the management system in real time
  • Users can remotely monitor the AED status to reduce the AED theft rate
  • Integrates with different emergency systems to remotely activate the buzzer of the AED cabinet - assists the rescuers in quickly reaching the AED and seizing the prime time for first aid


With AED Intelligent Management System (AIMS)*

  • Displays with different lights (green light, yellow light, red light) to distinguish the status of each AED and allows users to keep track of all AED equipment
  • Lists all recorded status of a single AED to automatically generate reports and send alert notifications


Test software

  • Provides test software for acceptance of on-site installation and regular testing WAIOT-N performance - tests functions such as alarm switch, AED cabinet status, AED equipment status detection, SIM card signal, and status of the connection to the server, etc.


*Note: WhaleTeq provides free IoT server setup and usage services if the user adopts the AIMS.





WAIOT-N Main Unit

General Specifications


Band 1, 2, 3, 4, 5, 8, 12, 13, 17, 18, 19, 20, 25, 26, 28, 66, 71, 85

SIM Card Type



5V 1A DC Power Adaptor


Housing: Aluminum

Size (L x W x H): 6.1 x 8.4 x 2.25 cm

Weight: 81.8 g

Sound Detection Specifications

Audio Frequency Analysis Algorithm

Max: 2 KHz


±15.6 Hz (±4 KHz/256)

Alarm/ Siren Detection Frequency

440, 500, 560, 800, 1000, 1200 Hz


WAIOT-N IoT Bridge

Port Buzzer, AED, AED cabinet

Housing: Aluminum

Size (L x W x H): 5.0 x 6.6 x 0.82 cm

Weight: 43.2 g


Specifications are subject to change without prior notice.


AED NB-IoT Module Main Set

Model No. Image Description


AED NB-IoT Module


5V 1A DC Power Adaptor


Optional AED IoT Bridge Set

Model No. Image Description


AED IoT Bridge to Cabinet Enclosure

K29-0100301 2*3 Pin Terminal Block Cable (Male to Male)


Optional On-Site Inspection Tool Accessory

Model No. Description
K27-1800305 USB to UART 1*4 Pin Cable (TTL)


Optional IoT Services

Model No. Description
H40-1C00001 IoT Server Setup Fee
H40-1C00002 IoT Server Usage Fee


Copyright © WHALETEQ Co., LTD All Rights Reserved.