CMRR 3.0+
CMRR 3.0+

CMRR 3.0+

The CMRR tester combining accuracy, convenience and test automation all together.
Compliant with IEC 60601-2-25, IEC 60601-2-27, IEC 60601-2-47, IEC 60601-2-26, YY1079, YY1139, YY0782, YY0885, ANSI / AAMI EC11, ANSI / AAMI EC13.
Applicable for R&D, compliance and production line testing.
Request a quote Inquiry list

Overview

  • CMRR Tester designed for diagnostic ECG, monitoring ECG, ambulatory ECG and EEG monitor
  • Extreme shielding structure, built-in sine wave generator and Vc voltage measurement circuit assure the accuracy of output signal
  • Exclusive shielding covers can be added for higher CMRR requirement
  • Touch screen maximizes the test efficiency in standalone operation
  • PC software operation allows to control and conduct test via mouse clicks
  • Optional Standard Assistant software pack simplifies the medical standard with test sequences, options, parameters and pass criterions
  • Software Development Kit (SDK) assists user to develop customized or automated test software with less efforts

Specification

ItemsOptionsSpecifications
Supply voltage0.5 / 2.828 / 20 / 2 / (70.71) (Vrms)±1%*
CM point voltage1.414 / 10 / 1 / (35.355) (Vrms)±1% (0.25Vrms ±2%)
Frequency50 / 60 / 100 / 120 (Hz)±1%
Electrode with ImpedanceChange electrode via the touch screen of CMRR 3.0+None / RA / LA / LL / V1 / V2 / V3 / V4 / V5 / V6 / ALL
Electrode without ImpedanceChange electrode via the touch screen of CMRR 3.0+RA / LA / LL / V1 / V2 / V3 / V4 / V5 / V6
Imbalance impedance, R51kΩ51kΩ ±1%
Imbalance impedance, C47nF47nF ± 5%
DC offsetInternal battery powered, can be added on RA / LA / LL / V1~V6300mV ± 1%
Up to 40hrs with intermittent use
100pF capacitorUse 11:1 (110MΩ:10MΩ) voltage divider to measure indirectly100pF ± 5%
EnvironmentIntended for normal laboratory environment. The selection of critical components is known to be stable in the range shown. The 110MΩ divider may be affected by high humidity in excess of 85%.            

15 - 30°C
10 - 75% RH

            

*Require to measure with the multimeter of higher accuracy.

Ordering information

CMRR 3.0+ Test System

Part No.DescriptionQuantity
100-CM00003Model No.: CMRR 3.0+
Advanced common mode rejection ratio tester with 11 compound terminals
1

 

Optional Software Add-on Pack 

Part No.Description
HA0-CM04001Auto setup for CMRR tests of IEC 60601-2-25 / IEC 60601-2-27 / IEC 60601-2-47
HA0-CM04002Auto setup for CMRR tests of YY0782 / YY0885 / YY1079 / YY1139 and ANSI/AAMI EC11 / EC13 standards
HA0-CM04003Auto setup for CMRR tests of IEC 60601-2-26

 

Optional Accessories

Part No.DescriptionQuantity
100-CM00005CMRR 3.0+ Shielding case (30 x 20 x 13cm) for testing Holter with better shielding performance.1

 

Optional Calibration Service and Warranty Extension

Part No.Description
YY0007Model No.: C3
Provides (3) years of calibration service coverage. WhaleTeq equipment can be calibrated to original performance on the basis of (1) year interval.
YY0008Model No.: R3
Extends the limited warranty from (1) year to (3) years.

 

Go Top