WhaleTeq Test Solutionsfor
Medical Device Manufacturers

Perform comprehensive AED testing, capable of checking shock energy waveforms and battery voltage. Paired with a dedicated mobile application connected to the cloud maintenance management platform, it enables real-time tracking and planning of testing routes, facilitating information synchronization and communication between management and inspection personnel.

Designed specifically for hardware and system engineers, this standalone multi-vital sign simulator outputs highly accurate and low-noise ECG analog signals. It can superimpose various signals, including respiration, lead-off, and noise simulation signals, aiding engineers in performing tests that closely resemble real-world scenarios to effectively verify the performance of the device under test (DUT). When paired with WhaleTeq’s PPG modules, it can simultaneously simulate SpO₂ signals for PWTT or PWV testing.
Equipped with the standard assistant software, it enables engineers to conduct compliance tests conforming to the following standards within a few clicks: IEC 60601-2-25, IEC 60601-2-27, IEC 60601-2-47, GB 9706.225, GB 9706.227, YY 9706.247, YY1079, YY1139, YY0782, YY0885, JJG 760, JJG 1042, ANSI/AAMI EC11, and ANSI/AAMI EC13.

Works with the AECG100 main console or SECG 5.0 AIO Multi Vital Sign Simulator as the first transmittance SpO₂ performance tester designed for R&D engineers in oximeter manufacturers.
This dual-channel optical module outputs R and IR analog signals to test heart rate and blood oxygen saturation (SpO₂) functions and is suitable for the development of transmittance PPG products such as finger clip oximeters and patient monitors to test performance.

Designed for engineers at AED/defibrillator manufacturers, the tester integrates multiple needed testing equipment and functions. With its dedicated software, test data such as the shock waveform, energy (in Joules), parameters, and characteristic points are displayed on one screen and automatically saved to establish a comprehensive test history.
Moreover, it offers switchable loads to evaluate AED shock performance across different scenarios and allows comparison of multiple shock waveforms through the Repeatability and Reproducibility Analysis, ensuring consistent AED/defibrillator quality and reliability.

The first parallel testing ECG tester specifically designed for wearable devices can simultaneously test ECG function on up to 4 devices with a single computer to accelerate testing time.
It provides compliance tests conforming with IEC 60601-2-47, YY0885, and YY 9706.247-2021, and can output 7 types of standard ECG waveforms to assist wearable devices in meeting regulatory requirements of accuracy.

The PPG-2R-880/PPG-2R-940 works with the AECG100 main console or SECG 5.0 AIO Multi Vital Sign Simulator, as the first reflectance SpO₂ performance tester designed for R&D in manufacturers.
This dual-channel optical module outputs R and IR analog signals to test blood oxygen saturation (SpO₂) and heart rate functions. Besides, it also allows users to adjust the R/IR’s rate of change of respiratory signals in PPG and set up add-on noise. It’s suitable for the development and verification of reflectance PPG products like wearable devices.

Simplify your AED Inspection and Complete Testing
A unified and cost-effective AED Management System with up-to-date reminder, test report, status tracking, and device management. Also, it provides complete testing solution includes on-site inspection, shock energy test, and battery test, which helps you lower the legal risk of AED ownership.